We use cookies to ensure that we give you the best user experience on our website.If you want to find out more about the cookies we use, you can access to our Privacy Policy here.By continuing your visit to our website, we'll assume you consent to our use of cookies.

DENSO DENSO WAVE

Close

FAQ

About "reset" and "full-reset"

How do you differentiate between “reset” and “full-reset”? What is the difference?

The BHT shall be reset if the program does not respond or run properly by touching the panel or the key. If this problem still remains, you need to full reset the BHT. Once the BHT is reset, the files and settings not yet saved in the RAM are cleared but those already saved are retained. In the case of full-reset, the programs and files saved in the RAM are all erased and all the settings are initialized. Therefore, you are recommended to back up the critical data in advance.

 

[Reset and full-reset procedures of BHT-1200-CE]

To reset the BHT, press and then release the BKSP key, the right-trigger key and the power key all together while the BHT is in the ON position.
To full reset the BHT, press the BKSP key, the ENT key and the left-trigger key all together for at least one second. Then, release all these three keys at the same time after you confirm the screen is turned OFF.

 

[Reset and full-reset procedures of BHT-1100-CE]

To reset the BHT, press and then release the M 1 key, the right-trigger key and power key at the same time while the BHT is in the ON position.
To full reset the BHT, press the M 1 key, the M 2 key and the left-trigger key all together for at least one second. Then, release all these three keys at the same time after you confirm the screen is turned OFF.

For more details, refer to the User’s Manual of your BHT

Contact us

QBdirect

If you have not registered

The services on this member site are available only for registered customers.

New member reg.