The actual printing layout differs from the layout in the site.
| Type | GT10Q-SB | ||
|---|---|---|---|
| Scanner | System | Area scanning | |
| Scanning Area (1) | 59 mm x 44 mm | ||
| Scannable codes | 2D codes | QR Codes, Micro QR Codes, DataMatrix(ECC200), PDF417, Micro PDF, MaxiCode, EAN.UCC Composiite | |
| Bar codes | EAN-128, UPC-A/E, UPC/EAN(with add-on codes), Interleaved 2 of 5(ITF), CODE39, CODABAR(NW-7), CODE128(EAN-128), RSS | ||
| Resolution | 2D codes | 0.25mm | |
| Bar codes | 0.15 mm | ||
| Scanning Confirmation | 3-color LED (red, blue and green), | ||
| Beeper(with volume control), vibrator | |||
| Image capture function | Yes | ||
| Marker | Area Maker | ||
| PCS Value | 0.45 Min. | ||
| I/F | Standard | Bluetooth ® Ver1.1 Power class2 | |
| Profile | Serial Port Profile (SPP) | ||
| Power Supply | Main Battery | Exclusive battery pack | |
| Operating Hours | Approx. 8 hours | ||
| Environmental | Operating Temp. | 0-50 °C(2) | |
| Requirements | Water-/Dust Proof | IP54(Equivalent to JIS splash resistance) | |
| Shock Resistance(3) | 2m (Concrete floor) | ||
| Operating Humidity | 10-90% RH(no condensation or frost) | ||
| Operating ambient illumination | 20-10,000 lux(Daylight florescent lighting) | ||
| Weight | Approx 260g | ||
The products are available for existing customers through designated channel partner for a limited time.
2D Code Handy ScannerMobile QR Code Models
GT10Q-SB series for USBluetooth® wireless 2D code scanner
| Model | Wireless Communication |
|---|---|
| GT10Q-SB | Bluetooth |
Each region has different availability of sales product.
Built-in Bluetooth ® wireless technology facilitates connection with a wide range of devices.
Because there are no cables, the GT10B can be installed anywhere (Min. 10m, with no obstractions).
Can be connected by simply scanning the bar code underneath the communication unit.
BA10
Multiple units can be used simultaneously by specifying where to connect.
Accurate data transmission possible with ACK/NAK protocol built-in.
Error correction code included in the data helps prevent missing and substitution of the data.
Prevents scanning in the event of disconnection.
Beeper and LED alarm function to warm of decline in battery voltage(planned).
An orange LED will flash at 200 mm second intervals and a beeper will sound 5 times.
Eight hours of operating time possible even with a constant Bluetooth ®connection (at one scan per 5 seconds).
Battery can be charged in approx. 2.5 hrs with the exclusive unit charger (CH-GT10N).
Realizes rapid scanning of bother 2D and bar codes (twice the speed(1) of conventional units).
Improved scanning of poorly printed 2D code labels (Compared with other Denso models).
Enables pinpoint aiming and scanning, even with multiple codes in the scanning area.
Instantly scans multiple bar codes at once.
Achieves high speed scanning equal to traditional innearscanners.
Realizes single scanning of QR code combinations.
With a stronger body and the use of impact-resistant rubber, the scanner can survive a 2 m drop-the highest standard in the world.
After many years of developing high quality technology, IEC International Standards Protection Class IP54 (equivalent to JIS spash resistance) has been achieved, preventing water and dust from infiltrating the scanner.
Laser illumination of scanning area and center of scannning area Tri-color Extra Bright LED
Tri-color LED display that shows operation status
Scan completion confirmed by vibration
3 levels of beeper volume to suit the surrounding environment
Code comparisonDetermines if a code being scanned matches a master bar code redistered in the GT10Q.
Sorts scanned barcode data and prints out only necessary data.
Wireless connection can be disconnected by pressing and holding the magic key for a few seconds. Reconnect by switching the trigger ON.
Marker swich control for easier pinpoint scanning
Two types of code can be pre-registered to enable easy swithing between the two types of code by turning the magic key ON.
Turn the magic key OFF to suspend scanning, and ON to resume.
Data that is already stored (eg operations initiation code) can be sent by switching the magic key ON.
Scanned data can be retransmitted when the magic key is ON so the bar code does not need to be repeatedly scanned.
Operation of a single magic key activates or ends Bar Code Reader Mode.
GT10B is readily available by using the QR_kbif keyboard interface software that allows easy programming without the need to create a serial communication program.QR kbif
Driver for USB interface is available at:Download "USB-COM driver"(Free)
Software for various parameter settings of the handy scanner made by DENSO WAVE
Software which converts the data from a scanner like input from a keyboard