Products

GT10Q-SB

2D Code Handy ScannerMobile QR Code Models

2D Code IconGT10Q-SB series for EU/Asia

Bluetooth® wireless 2D code scanner

Model Wireless Communication
GT10Q-SB Bluetooth

Each region has different availability of sales product.

caution

Connectable to a wide range of devices

Built-in Bluetooth ® wireless technology facilitates connection with a wide range of devices.

Connectable to a wide range of devices

Improvement in workability with wireless connection

Improvement in workability with wireless connection

Improvement in workability with wireless connection

Because there are no cables, the GT10B can be installed anywhere (Min. 10m, with no obstractions).

Can be connected by simply scanning the bar code underneath the communication unit.ArrowBA10

4 data-saving functions

No connection error

Multiple units can be used simultaneously by specifying where to connect.

Transmission Confirmation (planned)

Accurate data transmission possible with ACK/NAK protocol built-in.

Data Check (planned)

Error correction code included in the data helps prevent missing and substitution of the data.

Scan Lock

Prevents scanning in the event of disconnection.

Function to notify decline in battery voltage

Buzzer and LED alarm function to warm of decline in battery voltage(planned).

An orange LED will flash at 200 mm second intervals and a buzzer will sound 5 times.

Function to notify decline in battery voltage

Extended operating time

Eight hours of operating time possible even with a constantBluetooth ®connection (at one scan per 5 seconds).

Rapid Recharging

Battery can be charged in approx. 2.5 hrs with the exclusive unit charger (CH-GT10N).

Superior scanning performance

Realizes rapid scanning of bother 2D and bar codes (twice the speed(1) of conventional units).

Improved scanning of poorly printed 2D code labels (Compared with other Denso models).

Superior scanning performance

Divers scanning features

Divers scanning features

Target Pointer Mode

Enables pinpoint aiming and scanning, even with multiple codes in the scanning area.

Multiple Bar Code Scanning Mode

Instantly scans multiple bar codes at once.

Bar Code Reader Mode

Achieves high speed scanning equal to traditional innearscanners.

Single Scanning Mode

Realizes single scanning of QR code combinations.

World- leading impact resistance

World- leading impact resistance

With a stronger body and the use of impact-resistant rubber, the scanner can survive a 2 m drop-the highest standard in the world.

Superior environmental endurance

Superior environmental endurance

After many years of developing high quality technology, IEC International Standards Protection Class IP54 (equivalent to JIS spash resistance) has been achieved, preventing water and dust from infiltrating the scanner.

Superior handing

Area Marker

Area Marker

Laser illumination of scanning area and center of scannning area Tri-color Extra Bright LED

Tri-color Extra Bright LED

Tri-color Extra Bright LED

Tri-color LED display that shows operation status

Vibrator Function

Scan completion confirmed by vibration

Adjustable Buzzer Volume

3 levels of buzzer volume to suit the surrounding environment

Wide range of Functions

Code comparison

Determines if a code being scanned matches a master bar code redistered in the GT10Q.

Code comparison

Data Editing Function

Sorts scanned barcode data and prints out only necessary data.

Data Editing Function

Use of magic key

Wireless connection control

Wireless connection can be disconnected by pressing and holding the magic key for a few seconds. Reconnect by switching the trigger ON.

Marker swich control for easier pinpoint scanningCode type switching

Two types of code can be pre-registered to enable easy swithing between the two types of code by turning the magic key ON.

Scanning ON/OFF feature

Turn the magic key OFF to suspend scanning, and ON to resume.

Transmission of designated characters

Data that is already stored (eg operations initiation code) can be sent by switching the magic key ON.

Retransmission of scanned data

Scanned data can be retransmitted when the magic key is ON so the bar code does not need to be repeatedly scanned.

Activating and ending Bar Code Reader Mode

Operation of a single magic key activates or ends Bar Code Reader Mode.

Setup Software Easy to Install

Setup Software Easy to Install

ArrowScanner Setting

Utility Software for Easy Programming

GT10B is readily available by using the QR_kbif keyboard interface software that allows easy programming without the need to create a serial communication program.ArrowQR kbif

Driver for USB interface is available at:ArrowDownload "USB-COM driver"(Free)

  1. When scanning QR codes containing up to 150 characters of data.

ArrowPage Top