Accessories:Teaching pendants

Spec

Spec:Teaching Pendants

Item Teaching pendant
Model TP-RC7M-1
Power source 24VDC (supplied from robot controller)
Display LCD Liquid crystal display with backlight
7.5-inch TFT color LCD, 640 x 480 pixels
LED 3 LEDs (POWER, MOTOR, LOCK)
Operation Switches &
keys 		Robot stop button, deadman switch, jog dial, MOTOR power on/off key, AUTO/MANUAL selector switch, function keys,
LOCK key, R-SEL (robot selection key), M-MOD (motion mode) key, SPEED key, cursor key, OK key, Cancel key, Stop
key, Shift key, Moving direction key
touch-panel Liquid crystal display with touch-panel function
Emergency stop button Four B contacts, 4 circuit outputs (forced disjunction type)
Deadman switch(Enable
switch) 		3-position type (OFF-ON-OFF), 2 circuit output
Mode selector switch 3-position (AUTO, MANUAL, TEACHCHECK), keylock switch
Note 1. Switchable only with the key inserted
Note 2 .Pulling out the key locks the selector switch in Manual and Teach check modes. In Auto mode, the key cannot be
pulled out.
Environmental conditions Temperature 0 to 40° Relative humidity 90% or less (No condensation)
Degree of protection IP65
Weight 1.3kg or less
Cables 4m, 8m, 12m
CAUTION
  1. (1) Do not drop the teaching pendant and do not impact against the teaching pendant.
  2. (2) Touch the teaching pendant with your fingers only, never with the tip of a pen or any pointed object. Otherwise, the LCD may be broken.

矢印Page Top